Customers bare the burden for the inefficiency’s of the electric and utility companies due to Supply NEVER EQUAL to Demand, Costs of Transmission, Loss of Electricity, Paid for by Consumer, No Collection Capability. Solar is not capable of doing it alone because of usage peaks during morning and evening hours, because the sun settles down throughout the day, Solar Collection starts during morning after peak hours, max solar collection happens in the afternoon, and ends in evening during peak consumption. Meaning that in some cases, solar doesn’t produce enough electricity to act independently of the electric grid.
In other cases, the difference is wasted if Solar is directly delivered to the Load. (missing any type of storage unit, or a unit not large enough) Example- 3kW of Solar is being produced at peak. Demand is only 1 kW of Solar. So 2kW of Solar either losses or wasted or “net metered” back to grid (if grid-tied) at a loss – meaning sold back to the utility company without any profit to the consumer. And with this setup, power demands at night need to come from electric grid instead of using energy collected during daytime hours.
- Environmentally friendly and operates silently, odorless, and smoke-free
- All models are delivered fully assembled
- Plug and Play Installation
- Reduction of 50%-70% fuel consumption (last recourse for weather non permitting wind and solar as a source)
- General electricity is stored in self maintaining deep cycle stationary batteries
- All systems are comprised of NEMA3 enclosures
- Our aim is to provide clean energy for the future. Hybrid power generation remains the most forefront source of energy.
- Our units will provide 100% clean, green, renewable energy.
- Our all-inclusive units are the 100% solution to the world’s demand for clean energy and are capable of acting completely independent of the electric grid because of our priority power shifting and storage capabilities.
- Priority power shifting and storage capabilities are what makes our systems the most technologically advanced systems in the world.
- Our units are stackable – you can continually add 1 unit after another to run on the same network
- Our units are Capable of Giving any customer the luxury of owning their electricity (100% off the grid)
- These units are capable of solar, wind, biomass, geothermal, hydro, battery, generators, and also connecting to the electric grid.
- Our generators can run off of any type of commonly used fuel or diesel.
- The units are mobile
- The most technologically advanced systems that are able to run from any cpu, tablet, or mobile phone
- Powerful enough to replace a city’s entire electric grid
Off-Site Monitoring of ALL System Components-
- Simplified Training for Customer’s Technicians (lower costs/easier and faster installations/easier maintenance)
- Monitored in the United States or by Customer’s technicians off-site
- Components are compartmentalized for safety. Because of that, if there is a problem, it doesn’t spread and is easily diagnosed and repaired.
- Smartphone compatible
- VERY little downtime if repairs are needed
Federal and state grants and tax incentives make transitioning from traditional electricity to renewable green and clean energy profitable and efficient. In some cases, customers can take advantage of net metering – selling electricity back to the utility companies for profit. In other cases, customers can act as their own utility provider and provide electricity to the neighborhood offering savings and profit.
Our software is capable of diversifying battery tasks and can charge and/or power to each individual cell level. (Example- 50/50- 50% of battery can be used to power the load while the other 50% is charging; 75/25- 75% of battery for load/25% charging; 1/99- 1% batter for load/99% charging; OR ANY COMBINATION as needed and determined by software to create the most efficient (least expensive) operation for the consumer
Solar T Charger- Efficiently manages solar input resulting in higher photovoltaic voltage and higher battery voltage. Allows for 20%-30% more energy harvest in partial shadows. Converts A/C to D/C.
Shifting Unit- Allows for backup Gen #2-#4 to power load directly while batteries are charging. Up to 110% power transfer capability. A/C power straight to load
Z Inverter- Cleans power before transferring to load. Allows for clean sine waves and keeps frequency stable for sensitive equipment. Creates the best quality energy.
We Under Promise and Over Deliver
- Miles Per Gallon (MPG Example)- Can you imagine buying a car that has an advertised combined MPG of 35 MPG, but you only get 30? Wouldn’t that make you upset? What if they advertised 30 MPG and you got 35 MPG? I would be pleasantly surprised.
- Our TRIAC is rated at 1MW, but is capable of 1.2 MW
- 4 x 280 kW Diesel Generators (Rating total of 1.12 MW; ACTUAL Performance is 300kW each/1.2 MW Total)
- Battery rated at 1.2 MW
Multiple Redundancy System utilizing Solar, Wind, Batteries, GeneratorsPower Generator is Assembled as a Complete Unit- Plug and Play
- Safety is the #1 Priority- Shunts and Disconnects in Place to Isolate Affected Areas
- Modular and Stackable Design- Allows User to Add Units Without Having to Redesign Entire Layout
- Operation Can be Viewed Online or on Smartphone
- Minimal Yearly Maintenance
- Nema 3 Enclosure to Protect Against Harsh Conditions
What if there is no input (Solar/Wind/etc.)? Examples- Rainy Seasons/Hurricane/etc. Redundancies kick in with our diesel generator technology.
- Batteries cannot be charged with Solar/Wind/Other in cases lacking renewable resources
- 4 Diesel generator backups will deploy, enabling 100% off the grid efficiency
- 4 x 280 kW rated (actual 300kW)
- 1 dedicated diesel generator used to charge battery banks (as determine by software; 50/50, 75/25, 1/99, etc. example from before)
- Other 3 x 280 kW (actual 300kW x 3= 900 kW) generators to power the load just until batteries have enough charge, in which time the generators STOP and batteries power load.